Highly Conductive EEG Electrode Gel For ECG / Defibrillation / Biofeedback / EMG

Highly Conductive EEG Electrode Gel For ECG, Defibrillation, Biofeedback And EMG

Contains: Carboxymethyl cellulose, Polyoxyethylene (20) stearylether, Water,Glycerin,Lanolin alcohol,Coconut fatty acid diethanolamide,1.2 Propanediol,Potassium chloride,Sodium Chloride,Polyxoyethylene(20)sorbitol,Methylparaben,and Propylparaben.

Usage:
For use in neuromonitoring procedures in conjunction with electrodes.Use a bell shaped cup electrode with the hole in the center.Apply just enough paste inside of the EEG electrode to very slightly overfill the cup. Place the electrode onto the electrode site and press with medium pressure. A small amount of paste may come out the hole.Pressing too hard will cause all of the paste to come out and electrode will not adhere well. Clean with warm water.

Our EEG paste contains the right balance of adhesiveness and conductivity, enabling the electrodes to remain in place while allowing the transmittance of electrical signals.

Features:

1, Superior Adhesive

2, Easy clean up
3, Fast reduce Impedance
4, Applied with EEG Caps
5, Suit for Long-term EEG Monitoring
6, Available in 2 sizes: 500g / 1000g

electrode conductive gel

eeg conductive paste

Highly Conductive EEG Electrode Gel For ECG / Defibrillation / Biofeedback / EMG Images